INVT Goodrive 35 Series Operation Manual page 150

Goodrive35 inverters
Terminal
(P00.01=1)
P08.31 LED
ones set to 0
Terminal
function 35
motor 1 switches to
motor 2
Invalid
The control performance of the inverter is based on the established accurate motor model. The user
has to carry out the motor autotuning before initial running (take motor 1 as an example).
Start
Select running
command channel
(P00.01)
Keypad (P00.01=0)
Motor 1 and motor 2
switching channel selection
(P08.31)
P08.31 LED
ones set to 1
Valid
BIT0~1=00
Motor 1
143
Terminal
(P00.01=1)
P08.31 LED
ones set to 2
PROFIBUS
MODBUS
CANopen
communication
Communication
channel
channel
Communication set
value
2009H
BIT0~1=01
Motor 2
Basic operation instruction
P08.31 LED
ones set to 3
Ethernet
communication
channel