INVT Goodrive 35 Series Operation Manual page 86

Goodrive35 inverters
Function
Name
code
upper limit
AO2 output filter
P06.26
time
Lower output limit
P06.27
of HDO
Corresponding
P06.28 HDO output of
lower limit
Upper output limit
P06.29
of HDO
Corresponding
P06.30 HDO output of
upper limit
HDO output filter
P06.31
time
P07 Group Human-Machine Interface
User's password
P07.00
P07.01 Parameter copy
Detailed instruction of parameters
Setting range of P06.22: -300.0% – P06.24
Setting range of P06.23: 0.00 V – 10.00 V
Setting range of P06.24: P06.22 – 300.0%
Setting range of P06.25: 0.00 V – 10.00 V
Setting range of P06.26: 0.000s – 10.000s
Setting range of P06.27: -300.0% – P06.29
Setting range of P06.28: 0.00 – 50.00 kHz
Setting range of P06.29: P06.27 – 300.0%
Setting range of P06.30: 0.00 – 50.00 kHz
Setting range of P06.31: 0.000s – 10.000s
0 – 65535
The password protection will be valid when setting
any non-zero number.
00000: Clear the previous user's password, and
make the password protection invalid.
After the set user's password becomes valid, if the
password is incorrect, users cannot enter the
parameter menu. Only correct password can make
the user check or modify the parameters. Please
remember all users' passwords.
Retreat editing state of the function codes and the
password protection will become valid in minute. If
the valid password is available, press PRG/ESC to
enter into the editing state of the function codes, and
then "0.0.0.0.0" will be displayed. Unless input right
password, the operator cannot enter into it.
Note: restoring to the default value can clear the
password, please use it with caution.
The function code determines the manner of
parameters copy.
0: No operation
1: Upload the local function parameter to the keypad
79
Function parameters
Default Mod
value ify
○
0.000 s
○
0.00%
○
0.0 kHz
○
100.0%
○
50.00 kHz
○
0.000 s
○
0
◎
0