Operation; Equipment Setup; Setting Up As A Post-Processing Base - Leica GS18 User Manual

4
4.1
4.1.1
Use
Description
☞
☞

Equipment setup

Equipment setup
step-by-step

Operation

Operation
Equipment Setup

Setting up as a Post-Processing Base

The equipment setup described is used for static operations over markers.
The instrument can be programmed with the field controller before use which
can then be omitted from the setup.
The antenna is mounted directly using screw fitting. If using stub and
•
adapter, procedures can vary slightly.
When using the adapter and carrier, ensure that the antenna and the
•
adapter assembly slide down the full length of the carrier stub. An incor-
rectly mounted antenna will have a direct effect on the results.
Use an external battery such as GEB371 to ensure operation for a full day.
a
b
c
d
e
f
g
14284_002
a GS instrument
b SD card
c GEB331 battery
d GRT146 carrier
e Tribrach
f Height hook
g Tripod
h Utility hook
1. Set up the tripod.
2. Mount and level the tribrach on the tripod.
3. Ensure that the tribrach is over the marker.
h
i
j
k
l
m
n
o
i CS20 field controller
j GEB331 battery
k SD card
l CS30 tablet
m USB stick
n CS35 tablet
o USB stick
25