Rear Abs Wheel-Speed Sensor Removal/Installation - Mazda MX-5 Miata Sport 2007 Manual

REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION

1. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
2. Remove the partition board. (See PARTITION BOARD REMOVAL/INSTALLATION .)
3. Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
4. Remove the fuel-filler pipe protector. (See FUEL TANK REMOVAL/INSTALLATION [LF] .)
5. Remove in the order indicated in Fig. 14 .
6. Install in the reverse order of removal.
Fig. 14: Identifying Rear ABS Wheel-Speed Sensor (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.
REAR ABS WHEEL-SPEED SENSOR INSPECTION
INSTALLATION VISUAL INSPECTION
1. Inspect the following items:
If there is any malfunction, replace the applicable part.

1. Excessive looseness or play of the ABS wheel-speed sensor
2. Deformation of the ABS wheel-speed sensor
3. Deformation or damage of the ABS sensor rotor
CLEARANCE INSPECTION
2007 Mazda MX-5 Miata Sport
2007 BRAKES Antilock Brake System - MX-5 Miata