Subaru Impreza 2002 Service Manual page 87

Drive Shaft System
D: REAR DRIVE SHAFT
3. TURBO MODELS (STi MODEL)
D
A double offset joint (DOJ) is used on the differential side of each rear drive shaft. The DOJ can
be disassembled for maintenance. It provides a maximum operating angle of 23° and can be
moved in the axial directions.
D
A bell joint (BJ) is used on the wheel side of each rear drive shaft. Its maximum operating angle
is 43.4°.
(1) DOJ
(2) BJ
(3) Differential side
(4) Wheel side
REAR AXLE
DS-6
NF0591