Subaru Impreza 2002 Service Manual page 373

MANUAL TRANSMISSION AND DIFFERENTIAL
D: ASSEMBLY
NOTE:
Replace the following parts as a set.
• Sleeve and hub
• Outer baulk ring, 3rd synchro cone and inner
baulk ring
• Taper roller bearing
1) Sufficiently apply gear oil to the main shaft, 3rd
needle bearing and inner periphery of 3rd drive
gear.
2) Install the 3rd needle bearing and 3rd drive gear
to main shaft.
(A)
(B)
(A) 3rd needle bearing
(B) 3rd drive gear
3) Install the inner baulk ring, 3rd synchro cone and
outer baulk ring.
(A)
(A) Inner baulk ring
(B) Outer baulk ring
MAIN SHAFT ASSEMBLY
NOTE:
Install the 3rd synchro cone, by aligning protrusion
portions of the 3rd synchro cone with 3rd drive gear
hole portion.
4) Install the 3rd-4th hub and 4th bush.
TR0733
(B)
TR0734
6MT-78
(1) Set to the main shaft, taking care of 3rd-4th
hub installing direction.
(A) Main shaft
(B) 3rd-4th hub
(C) 3rd drive gear
TR0735
(A)
(B)
(C)
TR0984