TRANSFER DRIVEN GEAR
MANUAL TRANSMISSION AND DIFFERENTIAL
2) Using the ST, install the roller bearing of trans-
mission case side.
ST 499757002
INSTALLER
CAUTION:
Do not apply pressure in excess of 10 kN (1 ton,
1.1 US ton, 1.0 Imp ton).
B3M2139A
(A) Roller bearing
E: INSPECTION
1) Bearings
Replace the bearing in following cases:
• Broken or rusty bearings
• Worn or damaged
• Bearings that fail to turn smoothly or make ab-
normal noise when turned after gear oil lubrication.
2) Driven gear
Replace the driven gear in following case.
• If their tooth surfaces and shaft are excessively
broken or damaged.
6MT-61