Subaru Impreza 2002 Service Manual page 350

13.Reverse Checking System
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
4) Remove the snap ring and washer from reverse
check shaft.
(A) Snap ring
(B) Washer
5) Remove the reverse check shaft and spring from
the extension case.
REVERSE CHECKING SYSTEM
(B)
(A)
TR0675
TR0676
6MT-55
MANUAL TRANSMISSION AND DIFFERENTIAL
6) Remove the spring pin, then remove the reverse
check lever and oil seal from reverse check shaft.
NOTE:
Do not reuse the oil seal.
(C)
(A) Spring pin
(B) Reverse check lever
(C) Oil seal
7) Remove the plug from extension case, then re-
move the gasket, spring and plunger.
NOTE:
Do not reuse the gasket.
(A) Plug
(B) Gasket
(C) Spring
(D) Plunger
8) Remove the reverse lock plunger.
(A)
(A) Reverse lock plunger
(B)
(A)
TR0677
(D)
(C)
(B)
(A)
TR0678
TR0679