V-Belt - Subaru Impreza 2002 Service Manual

MECHANICAL

12.V-belt

A: REMOVAL
1. FRONT SIDE BELT
NOTE:
Perform the following procedures 1) to 4) with the
engine installed to body.
1) Remove the V-belt cover.
2) Loosen the lock bolt (A).
3) Loosen the slider bolt (B).
4) Remove the front side belt (C).
2. REAR SIDE BELT
1) Loosen the lock nut (A).
2) Loosen the slider bolt (B).
V-BELT
3) Remove the A/C belt.
4) Remove the A/C belt tensioner.
B: INSTALLATION
1. FRONT SIDE BELT
CAUTION:
Wipe off any oil or water on the belt and pulley.
1) Install the belt (C), and tighten the slider bolt so
B2M3401
as to obtain the specified belt tension <Ref. to ME-
45, INSPECTION, V-belt.>
2) Tighten the lock bolt (A)
3) Tighten the slider bolt (B).
Tightening torque:
Lock bolt through bolt:
Slider bolt:
B2M4291A
B2M2584A
ME-44
25 N·m (2.5 kgf-m, 18.1 ft-lb)
8 N·m (0.8 kgf-m, 5.5 ft-lb)
B2M2585
B2M4291A