Subaru Impreza 2002 Service Manual page 812

19) Install the air assist injector solenoid valve to
bracket.
Tightening torque:
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
20) Connect the air by-pass hoses to air assist so-
lenoid valve.
21) Connect the connector to air assist solenoid
valve.
22) Install the throttle body to intake manifold.
NOTE:
Replace the gasket with a new one.
Tightening torque:
22 N·m (2.2 kgf-m, 16.2 ft-lb)
INTAKE MANIFOLD
23) Connect the connector to throttle position sen-
sor and idle air control solenoid valve.
24) Connect the air by-pass hose to throttle body.
B2M3478
25) Install the intake air temperature and pressure
sensor.
B2M4266
Tightening torque:
3.4 N·m (0.35 kgf-m, 2.5 ft-lb)
NOTE:
Replace the O-ring with a new one.
H2M2951
FU-29
FUEL INJECTION (FUEL SYSTEMS)
B2M3479
B2M3480
B2M3475
H2M2999