Subaru Impreza 2002 Service Manual page 345

MANUAL TRANSMISSION AND DIFFERENTIAL
4) Using the ST, remove the bearing cone.
ST 18758AA000 PULLER
(A) Bearing cone
5) Remove the thrust washer and oil plate.
(B)
(A)
(A) Thrust washer
(B) Oil plate
6) Remove the shifter arm oil seal.
(A)
(A) Oil seal
7) Remove the reverse checking system. <Ref. to
6MT-55, REMOVAL, Reverse Checking System.>
8) Remove the extension oil seal. <Ref. to 6MT-33,
REPLACEMENT, Oil Seal.>
EXTENSION CASE
D: ASSEMBLY
1) Install the reverse checking system. <Ref. to
6MT-56, INSTALLATION, Reverse Checking Sys-
tem.>
(A)
2) Install the extension case oil seal. <Ref. to 6MT-
33, REPLACEMENT, Oil Seal.>
3) Using the ST, install the shifter arm oil seal.
ST1 18657AA000 INSTALLER
ST2 18671AA000 OIL SEAL GUIDE
TR0661
4) Install the oil plate.
TR0662
5) Select the bearing thrust washer, and then install
to extension case. <Ref. to 6MT-51, ADJUST-
MENT, Extension Case.>
6) Apply oil lightly to the outer periphery of bearing
cone, and then install to extension case.
7) Install the shift bracket.
Tightening torque:
TR0941
6MT-50
(A)
(A) Oil seal
25 N·m (2.5 kgf-m, 18.1 ft-lb)
TR0942
TR0663
TR0660