4. Canister
A: REMOVAL
1) Lift-up the vehicle.
2) Loosen the two clamps which hold two canister
hoses, and disconnect the three evaporation hoses
from canister.
3) Remove the canister from body.
B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
23 N·m (2.3 kgf-m, 17 ft-lb)
C: INSPECTION
Make sure the canister and canister hoses are not
cracked or loose.
CANISTER
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
EN0898
B2M4166
B2M4166
EC-7