14) Remove the spring pin, and then remove the
bush, washer and snap ring.
(A) Bush
(B) Washer
(C) Snap ring
15) Remove the bush and spacer from boss.
(B)
(A)
(A) Bush
(B) Spacer
16) Remove the bush and cushion rubber from
stay.
(A)
(A) Bush
(B) Stay
(C) Cushion rubber
D: ASSEMBLY
NOTE:
• Clean all parts before assembly.
• Apply NIGTIGHT LYW No.2 grease or equivalent
to each parts.
6MT GEAR SHIFT LEVER
(C)
(B)
(A)
TR0969
(A)
TR0992
(C)
(B)
TR0970
1) Mount the bush and cushion rubber on the stay.
(A)
(A) Bush
(B) Stay
(C) Cushion rubber
2) Install the bush and spacer to boss.
(B)
(A) Bush
(B) Spacer
3) Install the snap ring and washer to gear shift le-
ver, and then install the bush.
NOTE:
Apply grease to the bush.
(A) Bush
(B) Washer
(C) Snap ring
CS-9
CONTROL SYSTEMS
(B)
TR0970
(A)
(A)
TR0992
(C)
(B)
(A)
TR0969
(C)