Subaru Impreza 2002 Service Manual page 337

MANUAL TRANSMISSION AND DIFFERENTIAL
7. Preparation for Overhaul
A: PROCEDURE
1) Clean oil, grease, dirt and dust from transmis-
sion.
2) Remove the drain plug to drain oil. After drain-
ing, retighten it as before.
NOTE:
Replace the gasket with a new one.
Tightening torque:
Oil pan side
44 N·m (4.5 kgf-m, 32.5 ft-lb)
Clutch housing
70 N·m (7.1 kgf-m, 51.6 ft-lb)
(A) Drain plug (Oil pan side)
(B) Drain plug (Clutch housing side)
3) Attach the transmission to ST.
ST 18632AA000 STAND ASSY
4) Rotating parts should be coated with oil prior to
assembly.
5) All disassembled parts, if to be reused, should
be reinstalled in the original positions and direc-
tions.
6) Gaskets, lock washers and lock nut must be re-
placed with new ones.
7) Liquid gasket should be used where specified to
prevent leakage.
PREPARATION FOR OVERHAUL
(A)
(B)
TR0634
TR0649
6MT-42