Subaru Impreza 2002 Service Manual page 385

MANUAL TRANSMISSION AND DIFFERENTIAL
5) Align protrusion portions of the 1st synchro cone
to the holes of 1st drive gear to install.
6) Install the outer baulk ring.
7) Install the 1st-2nd hub.
NOTE:
• Align the protrusion portion of outer baulk ring
and cutout portion of 1st-2nd hub, then install.
DRIVEN GEAR ASSEMBLY
• Make sure to install the 1st-2nd hub in proper di-
rection.
TR0771
TR0772
8) Using the ST, install the 2nd hub.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
9) Make sure the 1st drive gear is smoothly turned
by hand. If not, reassemble.
6MT-90
(C)
(D)
(E)
(A) 1st-2nd hub
(B) Outer baulk ring
(C) Cutout portion of 1st-2nd hub
(D) Protrusion portion of outer baulk ring
(E) 1st driven gear
(A) 2nd bush
(B) 1st-2nd hub
(A)
(B)
(E)
(A)
TR0950
(A)
(B)
TR0773