Subaru Impreza 2002 Service Manual page 847

Hide thumbs Also See for Impreza 2002:

Table of Contents

FUEL INJECTION (FUEL SYSTEMS)

10) Disconnect the quick connector and then dis-

connect fuel delivery hose (A). <Ref. to FU(TUR-

BO)-68, Fuel Delivery, Return and Evaporation

11) Move the clips, and then disconnect the fuel re-

turn hose (B) and jet pump hose (C).

12) Remove the nuts which install fuel pump as-

sembly onto fuel tank.

13) Take off the fuel pump assembly from fuel tank.

B: INSTALLATION

Install in the reverse order of removal. Do the fol-

(1) Always use new gaskets.

(2) Ensure sealing portion is free from fuel or for-

eign particles before installation.

(3) Tighten the nuts in alphabetical sequence

shown in the figure to specified torque.

Tightening torque:

4.4 N·m (0.45 kgf-m, 3.3 ft-lb)

• 1600 cc and 2000 cc MODEL

• 2500 cc MODEL

C: INSPECTION

Connect the lead harness to connector terminal of

fuel pump and apply battery power supply to check

whether the pump operates.

• Wipe off the fuel completely.

• Keep the battery as far apart from fuel pump

as possible.

• Be sure to turn the battery supply ON and

OFF on battery side.

• Do not run the fuel pump for a long time un-

der non-load condition.

Show Quick Links

Chapters

Table of Contents