CONTROL SYSTEMS
16) Fix the slider and reverse check cable end with
spring pin.
NOTE:
Apply grease to the sliding part of slider.
(A)
(A) Slider
(B) Spring pin
17) Fix the reverse check cable to clip of stay.
NOTE:
Install the reverse check cable to upper side of
stay.
(A)
(A) Reverse check cable
(B) Clip
6MT GEAR SHIFT LEVER
(B)
TR0958
(B)
TR0974
E: INSPECTION
1) Check each part (bushing, cushion rubber, spac-
er, boot, stay and rod, etc.) for deformation, dam-
age and wear. Repair or replace any defective part.
Determine defective parts by comparing with new
parts.
CS-12
TR0975