Subaru Impreza 2002 Service Manual page 383

MANUAL TRANSMISSION AND DIFFERENTIAL
C: DISASSEMBLY
NOTE:
Each sleeve and hub engage at a specified point.
Mark an engagement point on the sleeve and hub
before disassembly.
1) Secure the ST on workbench.
ST 18664AA000 BASE
2) Lift the caulking of lock nut.
3) Install the ST3 to lock nut, set the driven gear as-
sembly on ST, then remove the lock nut and wash-
er.
ST1 18666AA000 HOLDER
ST2 18664AA000 BASE
ST3 18620AA000 ADAPTER WRENCH
4) Install the ST1 to 4th gear, then remove the ball
bearing, 5th-6th driven gear and 3rd-4th driven
gear.
ST1 18723AA000 REMOVER
ST2 499877000 REMOVER
(A) Ball bearing
(B) 5th-6th driven gear
(C) 3rd-4th driven gear
DRIVEN GEAR ASSEMBLY
TR0761
(A)
(B)
(C)
TR0762
6MT-88
5) Remove the driven gear key.
6) Remove the 2nd gear.
7) Remove the needle bearing and 1st-2nd sleeve.
(B)
(A) Needle bearing
(B) 1st-2nd sleeve
TR0763
TR0764
(A)
TR0765