Subaru Impreza 2002 Service Manual page 867

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
5. Purge Control Solenoid Valve
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the bolt which installs purge control so-
lenoid valve onto intake manifold.
3) Take out the purge control solenoid valve
through the bottom of intake manifold.
4) Disconnect the connector and hoses from purge
control solenoid valve.
PURGE CONTROL SOLENOID VALVE
G6M0095
H2M2985
H2M2986
EC-8
B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
16 N·m (1.6 kgf-m, 11.6 ft-lb)
CAUTION:
Carefully connect the evaporation hoses.
A: To fuel pipe
B: To intake manifold
C: INSPECTION
Make sure hoses are not cracked or loose.
H2M2985
B2M1893E