Subaru Impreza 2002 Service Manual page 219

MECHANICAL
(1) Piston
(2) Piston pin
(3) Circlip
(4) Gasket
(6) Turn the cylinder block so that #3 and #4 cyl-
inders face upward. Using the same procedures
as used for #1 and #2 cylinders, install the pis-
tons and piston pins.
15) Install the water pipe.
16) Install the baffle plate.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
17) Install the oil strainer and O-ring
Tightening torque:
10 N·m (1.0 kgf-m, 7 ft-lb)
18) Install the oil strainer stay.
CYLINDER BLOCK
(5) Service hole plug
(6) Service hole cover
(7) O-ring
19) Apply fluid packing to matching surfaces and
install the oil pan.
Fluid packing:
THREE BOND 1215 or equivalent
ME(STi)-80
Tightening torque: N·m (kgf-m, ft-lb)
T1: 6.4 (0.65, 4.7)
T2: 69 (7.0, 50.6)
B2M1323K
S2M1833A