Subaru Impreza 2002 Service Manual page 355

MANUAL TRANSMISSION AND DIFFERENTIAL
15.Transfer Driven Gear
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
4) Remove the transfer driven gear.
B: INSTALLATION
1) Install the transfer driven gear.
2) If the bearing or transfer driven gear is replaced,
select the transfer driven thrust washer. <Ref. to
6MT-51, ADJUSTMENT, Extension Case.>
3) Install the extension case. <Ref. to 6MT-49, IN-
STALLATION, Extension Case.>
4) Install the manual transmission assembly to ve-
hicle. <Ref. to 6MT-39, INSTALLATION, Manual
Transmission Assembly.>
TRANSFER DRIVEN GEAR
C: DISASSEMBLY
1) Using the ST, remove the roller bearing of exten-
sion case side.
ST 498515700
2) Using the ST, remove the roller bearing of trans-
mission case side.
ST1 899858600
ST2 899864100
TR0691
D: ASSEMBLY
1) Using the ST, install the roller bearing of exten-
sion case side.
ST1 398177700
TR0691
ST2 899864100
CAUTION:
Do not apply pressure in excess of 10 kN (1 ton,
1.1 US ton, 1.0 Imp ton).
6MT-60
REMOVER
REMOVER
REMOVER
INSTALLER
REMOVER
(A) Roller bearing
TR0692
TR0693
B3M2138A