Subaru Impreza 2002 Service Manual page 357

MANUAL TRANSMISSION AND DIFFERENTIAL
16.Center Differential
A: REMOVAL
1) Remove the manual transmission case assem-
bly from vehicle. <Ref. to 6MT-37, REMOVAL,
Manual Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
4) Remove the transfer driven gear. <Ref. to 6MT-
60, REMOVAL, Transfer Driven Gear.>
5) Remove the thrust washer and center differen-
tial.
(A) Thrust washer
(B) Center differential
6) Remove the needle bearing.
B: INSTALLATION
1) Install the needle bearing.
CENTER DIFFERENTIAL
(A)
(B)
TR0694
TR0695
TR0695
6MT-62
2) Install the thrust washer and center differential.
(A) Thrust washer
(B) Center differential
3) If replacing the center differential, select the
transfer drive gear and thrust washer and install.
<Ref. to 6MT-51, ADJUSTMENT, Extension
Case.>
4) Install the transfer driven gear. <Ref. to 6MT-60,
INSTALLATION, Transfer Driven Gear.>
5) Install the extension case. <Ref. to 6MT-49, IN-
STALLATION, Extension Case.>
6) Install the manual transmission case assembly
to vehicle. <Ref. to 6MT-39, INSTALLATION, Man-
ual Transmission Assembly.>
C: DISASSEMBLY
NOTE:
Do not disassemble the center differential because
it is a non-disassemble part.
1) Remove the snap ring.
(A)
(B)
TR0694
TR0696