Subaru Impreza 2002 Service Manual page 540

2. Front Brake Pad
A: REMOVAL
3. 17 INCH TYPE
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Jack-up the vehicle, and then remove the front
wheel.
4) Remove the clip.
(1)
(1) Clip
5) Remove the pad pins and cross spring.
(1)
(1) Pad pin
(2) Cross spring
6) Use a wrench to expand the pads, then push the
piston back.
FRONT BRAKE PAD
7) Remove the pad.
B: INSTALLATION
3. 17 INCH TYPE
1) Apply a thin coat of Molykote AS880N (Part No.
26298AC000) to each pad side.
BR0144
(2)
2) Install the pads on caliper body.
3) Install the cross spring.
4) Install the pad pins.
5) Install the crip.
BR0145
H4M1370
BR-7
BRAKE
H4M1371
BR0146