CONTROL SYSTEMS
4) Apply grease to the bush and boot, and then in-
stall to the gear shift lever.
(A)
(B)
(A) Boot
(B) Bush
5) Apply sufficient grease into the boss, and then
install the gear shift lever to stay.
6) Install the washer and snap ring.
(A) Snap ring
7) Insert the gear shift lever and rod into boot hole.
6MT GEAR SHIFT LEVER
TR0968
TR0967
(A)
TR0966
8) Install the rod.
Tightening torque:
11.8 N·m (1.2 kgf-m, 8.7 ft-lb)
(A)
(C)
(A) Rod
(B) Lever
(C) Stay
9) Install the boss to rod.
Tightening torque:
11.8 N·m (1.2 kgf-m, 8.7 ft-lb)
(B)
(A) Rod
(B) Boss
10) Install a new lock wire.
(A) Lock wire
CS-10
(B)
TR0965
(A)
TR0991
(A)
TR0964