Subaru Impreza 2002 Service Manual page 365

MANUAL TRANSMISSION AND DIFFERENTIAL
9) Install the snap ring, washer and collar of driven
gear assembly.
(C)
(A)
(B)
(A) Washer
(B) Snap ring
(C) Collar
(D) Washer
10) Install the oil pump. <Ref. to 6MT-65, INSTAL-
LATION, Oil Pump.>
11) Install the center differential. <Ref. to 6MT-62,
INSTALLATION, Center Differential.>
12) Install the transfer driven gear. <Ref. to 6MT-
60, INSTALLATION, Transfer Driven Gear.>
13) Install the extension case. <Ref. to 6MT-49, IN-
STALLATION, Extension Case.>
14) Install the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-44,
INSTALLATION, Oil Pipe.>, <Ref. to 6MT-47, IN-
STALLATION, Neutral Position Switch.>, <Ref. to
6MT-45, INSTALLATION, Back-up Light Switch.>
15) Install the manual transmission assembly to ve-
hicle. <Ref. to 6MT-39, INSTALLATION, Manual
Transmission Assembly.>
TRANSMISSION CASE
(B)
(A)
(C)
(D)
TR0713
C: DISASSEMBLY
1) Remove the oil pipe and oil guide.
(B)
(A) Oil pipe
(B) Oil guide
2) Remove the bolt, then remove the O-ring, relief
spring and relief valve.
(A) O-ring
(B) Relief valve spring
(C) Relief valve
3) Remove the bolt, then remove the O-ring, valve
spring and ball.
(A) O-ring
(B) Valve spring
(C) Ball
6MT-70
(A)
(A)
(B)
(C)
TR0714
TR0715
(A)
(B)
(C)
TR0716