Subaru Impreza 2002 Service Manual page 201

MECHANICAL
(3) Install the rocker cover on cylinder head.
Ensure the gasket is properly positioned during
installation.
5) Install the oil pipe.
Tightening torque:
30 N·m (3.1 kgf-m, 22.1 ft-lb)
6) Connect the variable valve timing solenoid valve
connector.
7) Install the spark plug cord.
8) Similarly, install the parts on right-hand side.
9) Install the tensioner bracket.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
CAMSHAFT
10) Install the right-hand belt cover No. 2.
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
11) Install the left-hand belt cover No. 2.
EN1207
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
EN1206
12) Install the crankshaft sprocket. <Ref. to
ME(STi)-56, INSTALLATION, Camshaft Sprock-
et.>
13) Install the camshaft sprockets. <Ref. to
ME(STi)-56, INSTALLATION, Camshaft Sprock-
et.>
14) Install the timing belt assembly. <Ref. to
ME(STi)-49, INSTALLATION, Timing Belt Assem-
bly.>
15) Install the belt cover. <Ref. to ME(STi)-46, IN-
STALLATION, Belt Cover.>
16) Install the crankshaft pulley. <Ref. to ME(STi)-
45, INSTALLATION, Crankshaft Pulley.>
17) Install the V-belt. <Ref. to ME(STi)-43, IN-
STALLATION, V-belt.>
S2M1163
ME(STi)-62
B2M0738
S2M1162