Subaru Impreza 2002 Service Manual page 811

FUEL INJECTION (FUEL SYSTEMS)
12) Connect the hoses to purge control solenoid
valve.
CAUTION:
Carefully connect the evaporation hoses.
(A) To fuel pipe
(B) To intake manifold
13) Install the engine harness onto intake manifold.
Tightening torque:
16 N·m (1.6 kgf-m, 11.8 ft-lb)
14) Connect the connectors to fuel injectors and
purge control solenoid valve.
15) Hold the engine harness by harness band (A)
and harness bracket (B).
NOTE:
Do not use the harness band on harnesses where
they are supposed to be protected by the fuel pipe
protector.
INTAKE MANIFOLD
16) Install the fuel pipe protector RH.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
B2M1893E
17) Install the fuel pipe protector LH.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
18) Connect the pressure regulator vacuum hose
to intake manifold.
B2M4271A
FU-28
B2M4130
B2M4129
H2M2961