Engine Assembly - Subaru Impreza 2002 Service Manual

MECHANICAL

9. Engine Assembly

A: REMOVAL
1) Set the vehicle on lift arms.
2) Open the front hood fully, and then support with
the hood stay.
3) Release the fuel pressure. <Ref. to FU-54, RE-
LEASING OF FUEL PRESSURE, OPERATION,
Fuel.> or <Ref. to FU(w/oOBD)-51, RELEASING
OF FUEL PRESSURE, OPERATION, Fuel.>
4) Remove the filler cap.
5) Disconnect the ground cable from battery.
6) Remove the air intake duct and air cleaner case.
<Ref. to IN-7, REMOVAL, Air Intake Duct.> and
<Ref. to IN-6, REMOVAL, Air Cleaner Case.>
7) Remove the under cover.
8) Remove the radiator from vehicle. <Ref. to CO-
39, REMOVAL, Radiator.>
9) Collect the refrigerant, and then remove the
pressure hoses. (With A/C)
(1) Place and connect the attachment hose to
refrigerant recycle system.
(2) Collect the refrigerant from A/C system.
(3) Disconnect the A/C pressure hoses from
A/C compressor.
ENGINE ASSEMBLY
10) Remove the air cleaner case stay.
• MT MODEL
• AT MODEL
G6M0095
11) Disconnect the following connectors and ca-
bles.
(1) Front oxygen (A/F) sensor connector (With
OBD)
(2) Front oxygen sensor connector (Without
OBD)
B2M3385
ME-34
S2M0900
B2M4251
B2M4243
B2M3108