4. Engine Coolant Temperature
Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the air intake duct and air cleaner as-
sembly.
<Ref. to IN-7, REMOVAL, Air Intake Duct.> and
<Ref. to IN-6, REMOVAL, Air Cleaner Case.>
3) Disconnect the connector from engine coolant
temperature sensor.
4) Remove the engine coolant temperature sensor.
ENGINE COOLANT TEMPERATURE SENSOR
G6M0095
B2M4261
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
16 N·m (1.6 kgf-m, 11.8 ft-lb)
FU-31
FUEL INJECTION (FUEL SYSTEMS)
B2M4275