9. Reverse Check Cable
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the gear shift knob.
3) Remove the console box front. <Ref. to EI-40,
REMOVAL, Console Box.>
4) Remove the spring pin from slider.
(A)
(A) Slider
(B) Spring pin
5) Remove the slider and spring.
(A) Slider
(B) Spring
REVERSE CHECK CABLE
(B)
TR0958
(A)
(B)
TR0959
CS-13
6) Cut the band clip, and then separate the reverse
check cable from gear shift lever.
7) Lift-up the vehicle.
8) Remove the under cover.
9) Remove the rear exhaust pipe and muffer. <Ref.
to EX(TURBO)-13, REMOVAL, Rear Exhaust
Pipe.>, <Ref. to EX(TURBO)-14, REMOVAL,
Muffer.>
10) Remove the crossmember. <Ref. to 6MT-35,
REMOVAL, Transmission Mounting System.>
11) Remove the snap pin and washer, and then
separate the reverse check cable from reverse
check lever.
(B)
(A) Snap pin
(B) Washer
(C) Reverse check cable
CONTROL SYSTEMS
TR0960
(A)
(C)
TR0954