Subaru Impreza 2002 Service Manual page 387

MANUAL TRANSMISSION AND DIFFERENTIAL
14) Install the inner baulk ring.
15) Sufficiently apply gear oil to the bush, 2nd nee-
dle bearing and inner periphery of 2nd drive gear.
16) Install the 2nd needle bearing and 2nd driven
gear.
NOTE:
Align the protrusion portion of 2nd synchro cone
with 2nd driven gear hole, then install.
(B)
(C)
(A) 2nd needle bearing
(B) 2nd driven gear
(C) Protrusion portion of 2nd synchro cone
17) Install the key.
DRIVEN GEAR ASSEMBLY
18) Using the ST, install the 3rd-4th driven gear.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
NOTE:
• Make sure to install the 3rd-4th driven gear in
proper direction.
• Align the groove of 3rd-4th driven gear with key.
TR0778
(A)
19) Make sure the 2nd driven gear is smoothly
turned by hand. If not, reassemble.
20) Install the key.
TR0779
TR0780
6MT-92
ST
(B)
(A) 4th gear
(B) 3rd gear
(C) 2nd gear
(A)
(C)
TR0781
TR0782