Subaru Impreza 2002 Service Manual page 819

FUEL INJECTION (FUEL SYSTEMS)
(4) Tighten the throttle position sensor holding
screws.
Tightening torque:
1.6 N·m (0.16 kgf-m, 1.2 ft-lb)
4) When using the Subaru Select Monitor;
(1) Turn the ignition switch to OFF.
(2) Loosen the throttle position sensor holding
screws.
NOTE:
For detailed operation procedures, refer to the Sub-
aru Select Monitor Operation Manual.
(3) Insert the cartridge to Subaru Select Moni-
tor.
THROTTLE POSITION SENSOR
B2M3765
B2M3765
S2M0286A
FU-36
(4) Connect the Subaru Select Monitor to data
link connector.
5) Turn the ignition switch to ON, and Subaru Se-
lect Monitor switch to ON.
6) Select the {2. Each System Check} in Main
Menu.
7) Select the {Engine Control System} in Selection
Menu.
8) Select the {1. Current Data Display & Save} in
Engine Control System Diagnosis.
9) Select the {1.12 Data Display} in Data Display
Menu.
10) Adjust the throttle position sensor to the proper
position to match with the following specifications.
Condition: Throttle fully closed
Throttle opening angle 0.00 %
Throttle sensor voltage 0.50 V
11) Tighten the throttle position sensor holding
screws.
Tightening torque:
1.6 N·m (0.16 kgf-m, 1.2 ft-lb)
B2M3148
B2M3765