Subaru Impreza 2002 Service Manual page 363

MANUAL TRANSMISSION AND DIFFERENTIAL
18.Transmission Case
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-44,
REMOVAL, Oil Pipe.>, <Ref. to 6MT-47, REMOV-
AL, Neutral Position Switch.>, <Ref. to 6MT-45,
REMOVAL, Back-up Light Switch.>
4) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
5) Remove the transfer driven gear. <Ref. to 6MT-
60, REMOVAL, Transfer Driven Gear.>
6) Remove the center differential. <Ref. to 6MT-62,
REMOVAL, Center Differential.>
7) Remove the oil pump. <Ref. to 6MT-64, RE-
MOVAL, Oil Pump.>
8) Remove the shim and spacer of driven gear as-
sembly.
(A)
(A) Driven gear assembly
9) Remove the snap ring.
TRANSMISSION CASE
10) Remove the pilot bolt.
11) Remove the holder reverse bolt.
TR0705
12) Remove the transmission case.
NOTE:
If the oil guide catches on shift fork, the transmis-
sion case may be difficult to be removed. Move the
oil guide right and left to remove. Do not pull the
transmission case by force.
TR0706
13) Completely remove the remaining liquid gasket
on transmission case and adapter plate.
6MT-68
TR0707
TR0708
TR0709