FUEL INJECTION (FUEL SYSTEMS)
D: ASSEMBLY
1) Install the fuel pipe assembly and pressure reg-
ulator, etc. to intake manifold.
2) Tighten the bolt which installs fuel pipes on in-
take manifold.
Tightening torque:
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
3) Connect the right side fuel hose to injector pipe,
and tighten the clamp screw.
4) Install the fuel injector pipe.
INTAKE MANIFOLD
5) Connect the left side fuel hose to injector pipe,
and tighten the clamp screw.
6) Connect the air assist hoses.
B2M3491
B2M4274
H2M2975
FU-26
B2M4273
B2M4149A