MECHANICAL
6) Remove the garage jack.
7) Install the pitching stopper.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 37 ft-lb)
T2: 58 N·m (5.9 kgf-m, 43 ft-lb)
8) Install the starter. <Ref. to SC-6, INSTALLA-
TION, Starter.>
9) Push the clutch release lever to fit bearing into
clutch cover.
10) Install the fuel filter and bracket.
ENGINE ASSEMBLY
11) Install the power steering pump on bracket.
(1) Install the power steering tank on bracket.
G2M0297
(2) Install the power steering pump on bracket,
and tighten bolts.
Tightening torque:
20.1 N·m (2.05 kgf-m, 14.8 ft-lb)
H3M1839A
(3) Install the power steering pipe bracket on
right side intake manifold, and install the spark
plug cords.
H2M1818
(4) Connect the power steering switch connec-
tor.
G2M0818
ME(STi)-38
EN0361
H2M1954
EN0206
EN0360