Subaru Impreza 2002 Service Manual page 959

MECHANICAL
20) Apply fluid packing to the matching surfaces,
and then install the oil separator cover.
Fluid packing:
THREE BOND 1215 or equivalent
21) Install the flywheel or drive plate.
To lock the crankshaft, use ST.
ST 498497100 CRANKSHAFT STOPPER
Tightening torque:
72 N·m (7.3 kgf-m, 52.8 ft-lb)
NOTE:
Use the ST to remove flywheel (MT vehicles only)
for 2500 cc model.
(3) Apply a coat of engine oil to the inside of oil
seal.
CYLINDER BLOCK
ST1 498497100
ST2 499057000
22) Install the housing cover.
23) Installation of oil pump
S2M1834A
(1) Discard the front oil seal after removal. Re-
place with a new one using the ST.
ST 499587100
(2) Apply fluid packing to the matching surface
of oil pump.
B2M3361A
Fluid packing:
THREE BOND 1215 or equivalent
B2M3393A
ME-82
CRANKSHAFT STOPPER
TORX PLUS
OIL SEAL INSTALLER
(A) O-ring
B2M3347A
S2M0235
S2M0739A