Subaru Impreza 2002 Service Manual page 377

MANUAL TRANSMISSION AND DIFFERENTIAL
(2) Using the ST, press in the 5th-6th hub.
ST1 18651AA000 INSTALLER
ST2 398177700 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
NOTE:
When pressing in 5th-6th hub, align the protrusion
portion of outer baulk ring and cutout portion of 5th-
6th bush by moving the outer baulk ring.
(C)
(D)
(A) 5th-6th hub
(B) Outer baulk ring
(C) Cutout portion of 5th-6th hub
(D) Protrusion portion of outer baulk ring
17) Make sure the 5th drive gear is smoothly turned
by hand. If not, reassemble.
MAIN SHAFT ASSEMBLY
(A)
(A)
(B)
TR0745
6MT-82
18) Install the 5th-6th shifting insert key in proper
place of 5th-6th sleeve.
NOTE:
Angle of each shifting insert key is 120° apart.
(A) 5th-6th sleeve
(B) Shifting insert key
19) Install the 5th-6th sleeve to 5th-6th hub.
NOTE:
• 5th-6th sleeve has two grooves for identification.
• Install the 5th-6th sleeve with the groove facing
to 5th drive gear side.
(B)
(A) 5th drive gear
(B) Groove (2) for identification of 5th-6th sleeve
(A)
(B)
TR0738
(A)
TR0747