9) Install the crossmember. <Ref. to 6MT-35, IN-
STALLATION, Transmission Mounting System.>
10) Install the rear exhaust pipe and muffer. <Ref.
to EX(TURBO)-13, INSTALLATION, Rear Exhaust
Pipe.>, <Ref. to EX(TURBO)-14, INSTALLATION,
Muffer.>
11) Install the reverse check cable end, washer
and snap pin to reverse check lever.
NOTE:
Take care to install the snap pin in proper direction.
(D)
(B)
(A) Reverse check cable
(B) Washer
(C) Snap pin
(D) Front side
12) Install the under cover.
REVERSE CHECK CABLE
(C)
(A)
TR0957
CS-17
CONTROL SYSTEMS