(4) Generator connector, terminal and A/C
compressor connectors
(A) A/C compressor connector
(B) Generator connector and terminal
(5) Accelerator cable
(6) Clutch release spring
12) Disconnect the following hoses.
(1) Brake booster vacuum hose
ENGINE ASSEMBLY
(2) Heater inlet outlet hose
B2M1291I
13) Remove the power steering pump from brack-
et.
(1) Loosen the lock bolt and slider bolt, and re-
move the front side V-belt. <Ref. to ME(STi)-43,
FRONT SIDE BELT, REMOVAL, V-belt.>
(2) Disconnect the power steering switch con-
nector.
S2M1931
(3) Remove the pipe with bracket from intake
manifold.
S2M1932
EN0204
ME(STi)-33
MECHANICAL
EN0205
EN0360
EN0206