Subaru Impreza 2002 Service Manual page 810

7) Install the fuel injectors.
NOTE:
Always use new O-rings.
(A) O-ring
(B) Fuel injector
NOTE:
Do not forget to install the fuel injector securing clip.
8) Tighten the bolt which installs injector pipe on in-
take manifold.
Tightening torque:
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
INTAKE MANIFOLD
9) Tighten the two bolts which install fuel pipes on
the left side of intake manifold.
Tightening torque:
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
B2M3492G
10) Tighten the bolt which installs injector pipe on
intake manifold.
Tightening torque:
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
B2M3488
11) Install the purge control solenoid valve.
H2M2965
FU-27
FUEL INJECTION (FUEL SYSTEMS)
B2M4272
H2M2966
B2M3487