Subaru Impreza 2002 Service Manual page 843

FUEL INJECTION (FUEL SYSTEMS)
4) Install the air vent pipe.
5) Connect the air vent hose to fuel filler pipe.
6) Insert the fuel filler hose (A) approx. 35 to 40 mm
(1.38 to 1.57 in) over the lower end of fuel filler pipe
and tighten the clamp.
CAUTION:
Do not allow clips to touch the air vent hose (B)
and rear suspension crossmember.
(B)
FUEL FILLER PIPE
EN0549
EN0546
(A)
EN0548
FU-60
7) Insert the air vent hose approx. 25 to 30 mm
(0.98 to 1.18 in) into the lower end of air vent pipe
and hold clip.
L = 27.5 ± ± ± ± 2.5 mm (1.083 ± ± ± ± 0.098 in)
(1) Hose
(2) Clip
(3) Pipe
8) Tighten the bolt which holds fuel filler pipe brack-
et on body.
Tightening torque:
7.5 N·m (0.75 kgf-m, 5.4 ft-lb)
9) Tighten the bolts which hold evaporation hoses
onto clip of fuel filler pipe.
B2M1195A
EN0547
EN0545