Ford Electric Ranger 2001 Manual page 288

412-01-4
REMOVAL AND INSTALLATION (Continued)
Air Distribution and Filtering
6. Pry the air filter arms from behind the housing
tabs, which are located at the three and ten
o'clock positions.
7. Remove the air filter.
•
•
•
Installation
1. Grasp the new filter at the 3 and 9 o'clock
positions and squeeze the outer edges to form a
''U'' shape.
2. Turn the filter counterclockwise until it is in the
10 and 4 o'clock position.
3. Insert at an angle by leading with the 4 o'clock
position through the blower motor opening.
4. Once the filter is in the housing, turn it to the
12 and 6 o'clock positions. This will orient the
filter correctly in the housing. Release the filter.
Grasp the air filter at the 3 and 9 o'clock
positions by the pleats and fold the filter in
half.
Turn the filter counterclockwise until the
filter is at the 10 and 4 o'clock positions.
Tip the 10 o'clock position of the filter
towards the outside of the housing and pull
the filter out through the blower motor
opening.
2001 Ranger EV, 01/2001
412-01-4