Ford Electric Ranger 2001 Manual page 712

414-03B-109
REMOVAL AND INSTALLATION (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
3. WARNING: The nominal voltage of
the traction battery is 300 volts. The buffer
zone must be set up and insulated rubber
gloves and a face shield must be worn.
Failure to follow these precautions may
result in severe personal injury or death.
Observe the EV specific precautions. Refer to
Section 100-00.
1 Set up the buffer zone.
2 Test and wear the insulated rubber gloves.
3 Wear the face shield.
4. Open the clips that secure the contactor box
harness to the high-voltage harness.
5. Cut the two zip ties securing the contactor box
harness.
6. Unclip and disconnect the sense lead located
behind the contactor box.
414-03B-109
2001 Ranger EV, 01/2001