303-03-20
REMOVAL AND INSTALLATION (Continued)
Cooling System Tubes and Hoses —Postal Ranger EV
Engine Cooling
Installation
1. To install, reverse the removal procedure.
After installation, bleed the cooling system.
•
Refer to
Removal
WARNING: Do not remove the
1.
radiator pressure relief cap if the coolant is
hot or if the coolant pump is running.
Turn the radiator pressure relief cap to the first
stop to remove any remaining pressure.
2. Raise and support the vehicle. Refer to
100-02.
Bleed — Cooling System.
2001 Ranger EV, 01/2001
303-03-20
Section