Ford Electric Ranger 2001 Manual page 131

205-05-3
REMOVAL AND INSTALLATION (Continued)
Rear Drive Halfshafts
Installation
1. Install the halfshaft.
Use the installation tool from Wheel Bearing
•
Removal Removal and Installation Kit or
equivalent.
2. Install the halfshaft end washer and nut.
Tighten the nut to draw the halfshaft
•
completely into the hub.
3. Install the motor/transaxle. Refer to
303-01.
205-05-3
Section
2001 Ranger EV, 01/2001