Ford Electric Ranger 2001 Manual page 25

100-05-11
GENERAL PROCEDURES (Continued)
Standard Service Procedures
8.
checked across the correct terminals. Wear
the rubber insulating gloves. Failure to
correctly discharge the capacitors could
result in severe personal injury or death.
NOTE: The positive and negative posts are
color coded. The positive cable has a red sleeve
on the end, and the negative cable has a black
sleeve on the end.
Probe the positive and negative terminals of the
TIM with the leads from the Capacitor
Discharge Tool. The voltmeter will display any
voltage present. Continue to probe the terminals
until the voltmeter reads 0 volts
9. Probe the positive terminal and the case of the
TIM using the leads from the Capacitor
Discharge Tool. The voltmeter will display any
voltage present. Continue to probe the terminal
and case until the voltmeter reads 0 volts
10. Probe the negative terminal and the case of the
TIM using the lead s from the Capacitor
Discharge Tool. The voltmeter will display any
voltage present. Continue to probe the terminal
and case until the voltmeter reads 0 volts. The
TIM capacitors have now been completely
discharged.
WARNING: Verify that the voltage is
2001 Ranger EV, 01/2001
100-05-11