Ford Electric Ranger 2001 Manual page 128

204-04-7
REMOVAL AND INSTALLATION (Continued)
Wheels and Tires
4. Lower the vehicle.
5. CAUTION: Failure to tighten the lug
nuts in a star pattern can result in high
brake disc runout, which will speed up the
development of brake roughness, shudder
and vibration.
Tighten the lug nuts to specification.
6. Advise the customer that the wheels need to be
retightened at 800 km (500 miles) after any
wheel (1007) change or any other time the lug
nuts have been loosened. This is required to
permit the wheel clamping system to seat
correctly so that the lug nuts will hold a
uniform clamp load and remain fully tightened.
7. Install the wheel cover, if so equipped.
204-04-7
2001 Ranger EV, 01/2001