Ford Electric Ranger 2001 Manual page 135

206-04-4
REMOVAL AND INSTALLATION (Continued)
Rear Disc Brake
4. Remove the caliper.
1 Remove the bolts.
2 Remove the caliper.
5. Inspect the caliper for leaks and replace if
necessary.
6. Remove and clean the caliper slide pins. After
cleaning, lubricate with Silicone Brake Caliper
Grease D7AZ-19A331-A meeting Ford
specification ESE-M1C171-A.
Installation
1. To install, reverse the removal procedure.
After installation, bleed the brake system to
•
remove any air that has become trapped in
the system. Refer to Section 206-00 of the
1998 Ranger Workshop Manual.
206-04-4
2001 Ranger EV, 01/2001