Ford Electric Ranger 2001 Manual page 511

414-03A-108
REMOVAL AND INSTALLATION (Continued)
High Voltage/Traction Battery
3.
the traction battery is 312 volts. The buffer
zone must be set up and insulated rubber
gloves and a face shield must be worn.
Failure to follow these precautions may
result in severe personal injury or death.
Observe the EV-specific precautions. Refer to
Section
1 Set up the buffer zone.
2 Test and wear the insulated rubber gloves.
3 Wear the face shield.
4. Pull the connectors from the top of the
contactor box.
5. Open the contactor box.
1 Remove the four screws.
2 Open the contactor box.
6. Use a fuse puller to remove the necessary fuse.
1 25A Charger Fuse
2 10A Heater Fuse
3 40A Auxiliary Fuse
WARNING: The nominal voltage of
100-00.
2001 Ranger EV, 01/2001
414-03A-108