204-02-11
REMOVAL AND INSTALLATION (Continued)
Rear Suspension
16. Using the special tool, align the spring clamp
plate, spring, and hub assembly.
• Tighten the bolt until the edges of the spring
clamp plate and the hub assembly are
parallel.
17. Tighten the bolts.
18. Remove the special tools.
19. Using the special tool, install the rear leaf
spring shim.
• If the shim does not have enough travel to
achieve the correct installation depth,
remove the steel shim and install a thicker
shim (four available).
204-02-11
2001 Ranger EV, 01/2001